The water purifier is not used for a long time, so please pay attention when restart

The emergence of water purifiers has ensured the safety of our drinking water and eased people’s troubles with water pollution. In the process of using water purifiers, there are many things that we cannot predict daily. For example, we have installed water purifiers, but we are on a business trip. , Tourism, family relocation, etc., due to various unpredictable factors that have not used the water purifier for a long time, what precautions should be taken when restarting use?
01. Flushing water purifier

When the water purifier is restarted, the water purifier needs to be rinsed clean. If it is not used for 3 days, it will be rinsed for about 3-5 minutes. If it exceeds 10 days or longer, it needs to be rinsed for more than 15 minutes until the residue is left. Rinse all the water.

　02、Open the sewage outlet

　　 Before restarting the water purifier, open the sewage outlet and discharge the sand and rust, so as not to cause the water purifier to be blocked, and the water will not be discharged or the water will have an odor.

03. The filter element must be replaced regularly

The filter element used inside the water purifier is different, and the life is different. If the water purifier is not used for a long time (such as more than 6 months or even longer), the filter element will lose the filtering function. At this time, the filter element of the water purifier needs to be cleaned. After the test, if there is still water purification effect, decide whether you need to replace the filter element according to the purification effect.

4
04. Close the tap water inlet

　　 The water purifier has not been used for a long time, and the tap water inlet valve should be closed to avoid the water leakage accident caused by the faucet falling off due to too much water pressure, causing unnecessary losses.

5
　　05、Flushing water filter element

If the water purifier has not been used for more than one month, bacteria will grow inside the water purifier filter. To avoid secondary pollution, the filter should be cleaned all over again when the water purifier is used again. If the water quality is poor and the water output is different after the flushing It is recommended to backwash the water purifier.